Showing posts with label 3D Prints. Show all posts
Showing posts with label 3D Prints. Show all posts

Monday, September 30, 2024

On The Painting Desk: A Ludus of Gladiators

 


I have a large collection of Crusader Miniatures gladiators to play The Games: Blood and Spectacles with.  I can easily field just about any combination of gladiator types, and I probably have enough models for 3 different gladiator troupes.  However, when I ordered my Chaos Guard Kill Team from Only Games I also picked up a pack of the Wargames Atlantic 3D printed gladiators.  Did I need more gladiators?  Not at all.  Do I have more gladiators?  Oh yeah! 


About 9 bodies and an assortment of gladiator gear, weapons, and heads came in the mail.  The models needed a bit of work removing flash and connection points.  About the same as removing flash and sprue connections from just about any models.  The bodies came as one piece, with separate arms and heads.  It looked like I could make a wide variety of gladiator types.  I started by gluing the torsos to some washers to act as bases.  

Before I got too far in the project, I decided I needed to get out the rules again to make the appropriate gladiators I would need.  Glancing at the Ludus creation rules the core of the Laniste's troupe was 1 gladiator of each class.  That meant I needed a Heavy, Medium, and Light type as a base.  It would be a no-brainer to go with a Murmillo, Secutor, and Retarius as those were the "core" gladiator types.  However, I had some options to make a few more exotic designs like a Gaulus (Big axe) or Dimachaerus (Two swords).  Oh, time to make some decisions! 

One thing I noticed right away was that the proportions on these guys are much more accurate.  The Crusader models have a bit more exaggeration in order to make their type obvious.  Not so much with these 3D Prints.  That makes some of their helmets look a lot less interesting or intimidating, but much more realistic in scale.  The weapons too are more delicate and less blocky.  Not sure how I feel about it yet, and am a bit concerned with how they will mix in with my existing Troupes?   

Primed, but not fully undercoated yet

 Per the rules, you start with 500 Denarii to spend.  I want the core of my Troupe to be hardened fighters, so I spend the money on 3 Deserters to be my core gladiators.  I decide on a Hoplomachus for my Heavy, a Dimachaerus for my Medium, and a Retarius for my Light.  That takes up about half of my recruiting cash up front, and now it is time to fill in the rest with some back-ups!  I probably want at least 1 back-up per type as well.  I pick-up 3 slaves to train-up as well, and I chose a Murmillo (Heavy), Secutor (Medium) and Retarius (Light).  That is 6 Gladiators for 3 events per Games?  I do not think that is enough.  I decide to purchase a Barbarian Gaulus for the giggles.  That will leave me some money in the bank.  A Troupe of 7 gladiators out of the 10 I have to paint.  The others can be used as Damnati or Noxi opponents as needed.  The rest of my money gets split-up and goes into reserve.       

  1. Deserter- Hoplomachus  
  2. Deserter- Dimachaerus
  3. Deserter- Retarius
  4. Slave- Murmillo
  5. Slave- Secutor
  6. Slave- Retarius
  7. Barbarian - Gaulus
With that sorted, it is on to the painting!  I start by doing my standard Grey Seer spray, then dark grey wash, and then white highlight.  Nothing too special there, but it is a different approach then what I used on my Crusader gladiator models, so we will see how they look together.  

Primed and Ready! 

For these guys, I wanted a wide variety of skin tones, and my speed paints were not going to be up to the challenge.  When painting, I try to go from the lowest point, i.e. skin; and work my way up on a model.  I was going to have to use my Armypainter paints along with my Flesh Wash to get the desired outcomes.  I used Elven Flesh, Barbarian Skin, Tanned Flesh, Fur Brown, and Monster Brown as my base skin tones.  Hopefully, that would give me a wide-variety of skin tones to match the cosmopolitan look of the Roman Empire?  We will have to see how it all turns out in the end!  

Diversity and Inclusion in this Ludus

From that step, I decided to go back to my Speedpaints and Metallic Speedpaints to finish them all off.  I was not 100% sure how that would look with my existing Base+Wash gladiators from Crusader.  Plus, I have not really used the Speedpaints on Historical models.  This would be a big experiment for me.  It would probably help me decide how I was going to paint my Anglo-Saxons next. 

For the most part, I was batch painting this guys.  I started with their foot wear and slowly moved up the models.  I would take a look at what the details were and then gather a couple paint options for that detail.  Then, I would put them in little groups and paint them up.  They took about one evening to get all the block painting done, and then I let them dry.  

Block Painted with Speedpaints

After letting them dry, I gave them all an Armypainter Soft Tone wash.  That would cover any missed gaps, define the models a bit more, and just dirty them up a bit to look more like gladiators.  I find the soft tone works pretty well for fleshy models or natural colors as it is based on a brown, sepia like tone for the wash.  

Painting is done!

That left the final step, basing.  My gladiators I have based differently than my other figures. Instead of the usual Territorial Brown with scattered lichen, I will be using beach sand to base them.  I stuck with the Territorial Brown, lathed it onto the bases.  Then, I dipped it into the sand and tapped off any excess.  This only took a few minutes to get them all based up.  

Based up

Here they are next to some of the other gladiators from Crusader.  

Wargames Atlantic 3D Prints on the left, Crusader metal gladiators on the right

Well, that was a nice little palette cleanser and test before going onto the next project.  The Anglo-Saxon army.  That has about 50 models in it.  However, as a test for using Speedpaints on Historical models, I think these turned out well.  In addition, I was able to successfully combine using regular Armypainter and Speedpaints to get a good result.  Doing this also sped up the time it took me to finish these 10 guys tookabout 3 days of work time, or a weekend for a unit.  A good pace.  

Until next time!  


Become a Patron and get access to all the cool stuff, a peak behind the curtain of Blood and Spectacles, and early-access to playtest games!  


You can follow Blood and Spectacles Facebook page or Instagram for more fun! 

Check out the latest publications and contact me at our Blood and Spectacles website

Or purchase all out games at the Blood and Spectacles Publishing Wargames Vault Page!          
     

Monday, May 20, 2024

On The Painting Desk: The Levellers- Chaos Guard for Kill Team


Going into the Siege Perilous with the True Crit Gaming Guild I wanted a chaos force.  Ever since the very old Eye of Terror campaign I have wanted a Traitor Guard for the tabletop.  The Vraksian Militia from Forgeworld was eye-opening and super-exciting when that came out.  Despite my desire, I never fully got to a place where I could create the army I had wanted.  Therefore, when the Blooded came out for Kill Team I was excited.  

However, I decided not to go with the standard Games Workshop version.  I had been eyeing up the Only-Games website to pick up some Wargames Atlantic digital figures.  I was interested in checking out their printed Gladiators and a few other odds and ends.  I had never really gotten 3D printed models from a supplier.  I had only printed my own. 

While on the website, I was drawn to a creator called Station Forge who made a wide variety of grimdark models.  One of their sets was called Corrupted Guard, and they were set-up in order to make a Blooded Kill Team.  I went ahead and ordered them and the Gladiators.  The time of shipping did take a bit, but I did not really realize they were coming from the EU when I first ordered them.  They had to come across the pond!     

They came all wrapped up nicely in some bubble wrap in relatively small boxes.  When I unwrapped them, I only had one chainsword that was broken.  However, there was still flash/supports that I had to remove from the printing process.  Perhaps a touch worse than the amount of Flash you have to remove from metal models.  


I took a look at the rules for the Kill Team and started to separate my minis into what was going with what, and what I was going to bring to the party.  For the most part, the set I ordered had everything I needed.  I would have preferred 3 more small bases though so I could have swapped in more Traitors to replace the Orgryn/Enforcers.  I had plenty of parts and bodies to do it, but 4 bases shy.  

The minis glued together fine with Gorilla Glue.  I then got to work priming them.  In retrospect, I should have washed them first just to be sure I got any resin materials off, but the Grey Seer Prime seemed to work just fine.  I then did my standard approach of washing them in a dark grey, and then drybrushed them white. When I was done, they were ready to be speedpainted.

Primed! 

These guys speedpainted relatively fast.  My biggest issue was that I had not planned out their paint scheme before I started so there was a lot of looking at the model, looking at the paint, and then trying to determine what parts were going to be painted.  For the most part, the detail was pretty good, with the Ogryn having the shallowest detail in some areas.  However, it didn't really hinder me on the model.  I used a couple of left-over Vet Guard parts such as the Medical bag for my Chaos Medic, a Vox for my Comms man, and a flamer Tank to make my Brimstone Grenadier look a bit more explosive.  The other downside was that the only support weapons were Plasma Guns, I would have loved a couple of other options, even as a separate purchasable option.  I like Melta-guns in Kill Team to erase annoying Space Marines.  The Trench Cleaner is armed with a shotgun, but the kit only had las-guns but the shield tells you who the guys is.  I also love the shield, so used the second one on the Chaos Thug model who looks much tougher than the stat-line probably warrants with that huge hammer!    

I decided that the primary color of my Levellers was going to be Crusader Skin for the coats.  This gave them a somewhat drab overall look.  I then accented it with Slaughter Red, Palid Bone, and Malignant Green.  Since I used skin tones for the coat, I simple gave their primed faces a skin tone wash which made them look very unhealthy!  This gave them a suitably Chaotic look.  I toyed around with giving them the same colors as my Vet Guard like they had fallen from the same unit, but ultimately decided to make them distinct.  Afterall, the Levellers were most likely former PDF troopers and not Imperial Guard!    

For finishing touches I washed them all with a light tone brown based wash to gribble them up a bit and fill in any gaps.  I painted their bases Hardened Leather and trimmed the bases Citadel Chaos Black.  As usual nothing fancy on the bases.  Finally, I waited until a nice day and gave them a Matte Spray as a final touch.  

So from left to right we have the Brimstone Grenadier, the Flenser, the Butcher, the Trench Sweeper, the Medic, a Specialist with Plasma, another Plasma specialist, the Thug, the Ogryn, the Comms guy, the sniper, the Champion, a traitor, and finally the Enforcer. 

The Levellers are members of the Cult of the Emperor's Hand that have had their simple faith corrupted.  They are mostly farm hands, indentured servants, workers, and traitor PDF troopers from the outskirts of Absaroka.  They are dedicated to tearing down the Imperial society and "levelling" it so that all are equal in the eyes of the Emperor.  They have a special hatred for the Great Houses and their lap-dogs and are eager to swarm into Warzone Epsilon, Delta, and Sigma of Powellington.  Of course, their zeal, violence, and bloodlust against their former rulers has allowed the Levellers to easily be unwittingly turned to the services of the Chaos Gods.    

Final Thoughts

Overall, I am very pleased with how these guys turned out.  I think the "Flesh Coats" makes them look very Chaos-y.  I especially enjoy the Sniper, Flenser, Butcher, and the Brimstone Grenadier.  I was happy with the price and final result, even if it took a bit to get them and finish cleaning them up.  I would consider getting more pre-printed 3D models in the future as they painted up just as easily as Wizkids plastics and better than some formulations of Reaper Bones. 

Never fear, I still have a 8 Gladiators to paint up, a couple Reaper minis for Of Gods and Mortals, and a whole Heroquest box to paint.  I am not close to being dead yet.  However, it did make me consider finishing off my Chaos Kill Team with a box of Chaos Legionaries and/or some Beastmen?     

Until next time! 


Become a Patron and get access to all the cool stuff, a peak behind the curtain of Blood and Spectacles, and early-access to playtest games!  


You can follow Blood and Spectacles Facebook page or Instagram for more fun! 

Check out the latest publications and contact me at our Blood and Spectacles website

Or purchase all out games at the Blood and Spectacles Publishing Wargames Vault Page!       

     

    

Monday, March 4, 2024

On The Painting Desk: Battle of Kadesh - The King Summons Us

 



I am still forging ahead on my Battle of Kadesh armies that go along with me latest "In-Progress" rules set In Strife and Conflict.  This project began in earnest in 2023, but the rules were written for about 5 years now.  Hopefully this is the year I can get all the post-production wrapped up and I can release it to you!  

In addition to releasing it to you, I want to use the Battle of Kadesh as a "Demo Game" for non-wargamers as a way to introduce folks to ancient history AND wargaming.  Therefore, I want to have a good scenario and a fun spectacle game that is easy to set-up and looks great.  To that end I have been building an Egyptian and Hittite force.  The Egyptians are done.  I have been powering away on the Hittites now. 

The Hittite force I have is 6mm miniatures from Baccus.  I am then placing them on 60 x 60mm bases.  When complete this army will have: 

  • 3 Heavy Chariots
  • 3 Light Chariots
  • 1 Auxiliary Infantry with Bow support
  • 1 Auxiliary Infantry
  • 2 Levy Infantry with Bow Support
  • 3 Levy Infantry
  • 2 Archer Units
  • 2 Skirmisher Units with Bows
  • 2 Irregular Units
So far, I have painted the Skirmishers, Irregulars, and Levy units with bows.  That leaves 13 more bases to go!  Next up, I have decided to continue working on the infantry forces.  I have started batch painting the 3 Levy infantry, and 2 Archers units.  Once done, that will leave the more advanced units to finish off the army.   


For the new units, I am following my usual process.  I attached the strips to popsicle sticks with white glue.  I then undercoated them all with a watered down Pavement that is a cheap acrylic from a Big-Box retailer.  Then, I leaned into the batch painting using my standard Armypainter Paints. 


This stage should look pretty familiar!  I then paint the base strips with the same cheap acrylic Territorial Brown so when I base them it makes painting the base much easier.  I then added them to the bases using color-changing spackle.  


Then, I painted the bases with Territorial Brown, Khaki drybrush, and green ink.  The final step is to edge the bases in black.  


Here is an army shot of the Hittite forces so far: 


We have: 

2 Irregular infantry
2 Skirmishers with bows
2 Levy Infantry with Bow support
3 Levy Infantry
2 Archer units

That is 11 of the 19 bases done!  I only have 2 infantry units and 6 chariot bases left to paint.  This army is officially half-way done now! Here they are on the march to Kadesh to support their King:


The skirmishers take the lead and scout out the pass before the rest of the army marches through.

That has not been the only movement on the project!  My friend, Kelly Watson; made a really cool 3D printable Bronze Age city to act as Kadesh on my tabletop.  Kudos to him for his amazing work!  This can be based on a CD for easy basing.  


It is modular and expandable as well.  So I can add in more gate sections, or make it more oblong.  Kelly is planning on making these STLs available for sale.  I will let you know where you can find them when they are available.  That way you can have your own walled city too! 


More progress on the Battle of Kadesh.  I am hoping to get this project wrapped up before the mid-year point.  So far, things are looking really good!  I can't wait to take the scenario out for a full test-drive! 

Until next time!          


Become a Patron and get access to all the cool stuff, a peak behind the curtain of Blood and Spectacles, and early-access to playtest games!  


You can follow Blood and Spectacles Facebook page or Instagram for more fun! 

Check out the latest publications and contact me at our Blood and Spectacles Website

Or purchase all out games at the Blood and Spectacles Publishing Wargames Vault Page!