Monday, November 16, 2026

On The Painting Desk: The Vandals are Finished!

 

Welcome back Faithful Readers!  

Last time we checked in on the Vandals, we had finished off painting the base colors on them.  You may recall that I batch painted 60 some models together to get this far.  Therefore, it took a while to get the base colors done on all 60 models!  However, now it is time to finish this force off!  That means a wash, basing, and painting and putting on their shields! 

Here is where we left off! 


So, the next step is to give them all a wash.  Typically, on heavy chain-mail dudes I have been using a Dark Wash.  However, that uses a black-base color.  On less heavily armored models I use Light Tone, which is a sepia-tone wash.  So, what should I do with a mix of model styles?  For my Anglo-saxons I used a Dark wash on all of them, but was not 100% happy with the results as they came out a bit dark.  However, I am almost out of Light Tone wash, and do not have enough for 60 models! 

Therefore, I decided to use a Strong-tone wash.  It is also sepia-based like Light Tone.  However, it is a dark brown giving a dark-lining potential closer to the Dark Tone wash.  Plus, I had enough of it to do the job without going out and buying more wash!  In a pinch I could make some with watered down cheap acrylic Sepia paint, but I prefer to not make my own as it can be too inconsistent if I do not make enough in the first batch.

So, I gave everyone a wash of Strong Tone, and they turned out looking like this: 

Regulars and Militia


  
Elites and Archers

Cavalry

Not bad looking!  I think the wash really helped bring out the details!  

After I let that dry, it was time to base all these minis.  My basing technique is very simple.  First, I give the bases a coating of cheap, acrylic paint called Territorial Brown paint.  While it dries, I sprinkle bits of moss on the base which gets adhered to the base via drying.  That's it!  Some of the cavalry bases have some sculpted on grass that I will need to go back and paint with Malignant Green.  

However, I am running low on scatter moss, so we will see how far I can get before I run out!  Thankfully, this type of moss is pretty easy to find at your average big box retailer or craft store.    

After completing the basing, the Vandal army looks like this: 


The last step is getting the shields painted and mounted on the miniatures.  Sadly, I did not bring enough shields with me, so I had to travel back to home base before I could get this down for all the Vandals.  That slowed me down a lot!  I had to travel several thousand miles for these shields!  

When I painted up the shields for my Anglo-Saxons I wrote up a blog post on my process.  Vandals are also Germanic Barbarians so they use similar shield designs as Anglo-saxons.  You can see some common Barbarian shield designs here: 


Therefore, I am not going to spend time reproducing the results here.  Just know that I painted them up using the same methods.  I painted them on the sprues using a primer coat, base coats, design, and then a strong tone wash to complete the shields.  

Once done, I snipped them off the sprue, mounted them on the model, and touched up any gaps.  When all was said and done, the Vandals were completed.  This took me about 7 days of work, so about two months from beginning to end.   


The heavy cavalry....


The Palantini....


I can use the officer of the heavy cavalry or the Palantini as my army commander.  

Comitatense ......


Limitani....


Archers.....


The very last step was to spray them all down with a Satin enamel clear coat to act as a protectant to the speedpaints.  That finished them all up!   

Final Thoughts
So, I was skeptical about using my Armypainter V1 for historical miniatures.  For the most part, they worked fine.  However, they did not do well on the shields at all.  They tended to run, even when I painted basic acrylic white over them.  I didn't even bother to add another color to those shields and just kept with white and a coat of Strong Tone. 

I was happy with the Gripping Beast miniatures.  They are easy to batch paint and came together quick.  The detail is just enough for a good army look.  I was not crazy about how some of the shields were connected to the sprue though.  I would use them again for another big army project like the Vandals.  Not sure about using them for skirmish gaming, as they do not have enough individual character like Victrix minis do. 
              
Now, the question is do I keep on with the Vandals or switch over to the Late Roman troops.  I still have plenty of Vandal troops I could paint up.  They are assembled and ready to go, plus these did not take that long to paint up.  On the other hand, with a painted Late Roman force, I could start doing some better playtesting.  Paper templates only get you so far.

Decisions, decisions.  It also might be a while until we get to see photos of these minis on an actual table. just an FYI.  

Until next time!  


Become a Patron and get access to all the cool stuff, a peak behind the curtain of Blood and Spectacles, and early-access to playtest games!  


You can follow Blood and Spectacles Facebook page or Instagram for more fun! 

Check out the latest publications and contact me at our Blood and Spectacles Website

Or purchase all out games at the Blood and Spectacles Publishing Wargames Vault Page!         


   






Become a Patron and get access to all the cool stuff, a peak behind the curtain of Blood and Spectacles, and early-access to playtest games!  


You can follow Blood and Spectacles Facebook page or Instagram for more fun! 

Check out the latest publications and contact me at our Blood and Spectacles Website

Or purchase all out games at the Blood and Spectacles Publishing Wargames Vault Page!            




No comments:

Post a Comment